Corsair VENGEANCE 32 Gt (2 x 16 Gt) DDR5 6000 MHz, CL36 -muisti (XMP)
Corsair VENGEANCE 32 Gt (2 x 16 Gt) DDR5 6000 MHz, CL36 -muisti (XMP) -arvostelut
Perustuu 15 arvosteluun
I did plenty of research and its pretty much a consensus that DDR5-6000 CL30 is the sweet spot for performance and stability. Seems to be true I've had 0 issues so far and expect none in the future Any brand is going to be the same if you see a better price, but Corsair has worked well for me in past builds so I don't see a reason to change.
I did plenty of research and its pretty much a consensus that DDR5-6000 CL30 is the sweet spot for performance and stability. Seems to be true I've had 0 issues so far and expect none in the future Any brand is going to be the same if you see a better price, but Corsair has worked well for me in past builds so I don't see a reason to change.
Anthony3547
10. lokakuuta 2024
The RAM works well, but takes a bit of time to get started. The casing is flimsy and feels very cheap while installing the RAM.
The RAM works well, but takes a bit of time to get started. The casing is flimsy and feels very cheap while installing the RAM.
Andrew2099
6. lokakuuta 2024
Asus Prime z790P WIFI ja i9-14900K ja nämä muistit. Biossista kun laittaa xmp päälle niin kone ei käynnisty. Eli ei toimi kuin 4000mhz oletusarvoisesti, vaikka pitäisi toimia kuten luvattu, eli 6400mhz, tai edes 5600mhz, mutta ei toimi. Yhteensopivuus tarkistettu QVL.
Asus Prime z790P WIFI ja i9-14900K ja nämä muistit. Biossista kun laittaa xmp päälle niin kone ei käynnisty. Eli ei toimi kuin 4000mhz oletusarvoisesti, vaikka pitäisi toimia kuten luvattu, eli 6400mhz, tai edes 5600mhz, mutta ei toimi. Yhteensopivuus tarkistettu QVL.
Puukkosaha
20. elokuuta 2024
Works great at xmp speeds on msi z790 tomahawk wifi with 14700k.
Works great at xmp speeds on msi z790 tomahawk wifi with 14700k.
peepoo
31. heinäkuuta 2024
Trying to make work in a MSI MAG Tomahawk X670E, latest BIOS. Worked with G.SKILL sticks at 6000 previously, slightly worse timings. Boots at 4800 and recognizes the RAM correctly, but changing to XMP1 always produces 3 long beeps on boot, tried 2 sticks, swap stick position, 1 stick by itself, the other stick by itself, same results every time. Changing the DRAM voltage to High (this worked for the G.SKILL), also setting manually to 1.4V as a separate test. Maybe I got a bad batch or it's incompatible with my MB, not sure, but definitely cannot recommend at this time.
Trying to make work in a MSI MAG Tomahawk X670E, latest BIOS. Worked with G.SKILL sticks at 6000 previously, slightly worse timings. Boots at 4800 and recognizes the RAM correctly, but changing to XMP1 always produces 3 long beeps on boot, tried 2 sticks, swap stick position, 1 stick by itself, the other stick by itself, same results every time. Changing the DRAM voltage to High (this worked for the G.SKILL), also setting manually to 1.4V as a separate test. Maybe I got a bad batch or it's incompatible with my MB, not sure, but definitely cannot recommend at this time.
AndrewK2
11. toukokuuta 2024
