Sharkoon SHARK ZONE C10, PC, Musta, Keltainen, Mini-ITX, Metalli, Pelaaminen, 15 cm (4044951016426)
Sharkoon SHARK ZONE C10, PC, Musta, Keltainen, Mini-ITX, Metalli, Pelaaminen, 15 cm (4044951016426) -arvostelut
Perustuu 19 arvosteluun
This is a German design very good value well build, I would advise to get some proper branded 120 mm fans to use with this to improve airflow. Compact this what I needed.
This is a German design very good value well build, I would advise to get some proper branded 120 mm fans to use with this to improve airflow. Compact this what I needed.
PATRICK YAN
10. helmikuuta 2021
Lovely case and easy to work with BUT if you have a long GFX card there are two problems, firstly it says it takes 31.5cm cards and although they fit in length ways the long ones will touch the DVD mount of the case thus shorting the circuit board and secondly they have not allowed any room for the larger coolers on these longer cards and unless they are the type that sit flat within the dual slots like the gtx 750 type short card, will stop the case from closing on the side. The leads exiting an ATX PSU if used are also very close to any rear mounted components on the mobo, the ram in my case, which left it touching the main Mobo power lead also you will not be able to get at the power switch after fitting as it uses a fly lead to feed it due to it being fitted in the front of the case but sadly they haven’t provided a replacement isolating power switch on the back of the case.
Lovely case and easy to work with BUT if you have a long GFX card there are two problems, firstly it says it takes 31.5cm cards and although they fit in length ways the long ones will touch the DVD mount of the case thus shorting the circuit board and secondly they have not allowed any room for the larger coolers on these longer cards and unless they are the type that sit flat within the dual slots like the gtx 750 type short card, will stop the case from closing on the side. The leads exiting an ATX PSU if used are also very close to any rear mounted components on the mobo, the ram in my case, which left it touching the main Mobo power lead also you will not be able to get at the power switch after fitting as it uses a fly lead to feed it due to it being fitted in the front of the case but sadly they haven’t provided a replacement isolating power switch on the back of the case.
ExCaLiBuR-UK
3. marraskuuta 2020
I purchased this to house a PI4 and usb NAS used the case fan to cool pi. Overkill but the only cable that are visible are power and hdmi. A well built versatile case.
I purchased this to house a PI4 and usb NAS used the case fan to cool pi. Overkill but the only cable that are visible are power and hdmi. A well built versatile case.
Lookslikerain75
20. syyskuuta 2020
One clip on front snapped but still worked nice size can take cd/dvd player .
One clip on front snapped but still worked nice size can take cd/dvd player .
Les
19. tammikuuta 2020
It is difficult to fit in everything that the sellers claim will fit in - we now have it working with the motherboard protruding by at least a centimetre. Disappointing because we needed a small case for a particular reason, There is also no provision for cable management. so it looked cool, but it isn't fit for purpose.
It is difficult to fit in everything that the sellers claim will fit in - we now have it working with the motherboard protruding by at least a centimetre. Disappointing because we needed a small case for a particular reason, There is also no provision for cable management. so it looked cool, but it isn't fit for purpose.
Pam D.
21. helmikuuta 2018
