Thermaltake Core V21 enclosure (CA-1D5-00S1WN-00)

El producto llego bien embalado, todo es exactamente como en la publicacion me gusto, tenia la duda del tipo de fuente de poder que le cabe pero le entran las normales. no lo he probado an pero todo se ve en buen estado, nuevo.

I had X71 and downgraded to V71 for smaller size. This case does not need to be this big. #1 it cannot support vertical GPU mount because GPUs take 3 slots and this has 2. #2 IF they would have moved SSD rack to the right by 1 inch, a lot more GPUs would fit without the need to remove any of the SSD racks. #3 Top of the case cover is too thick. There is a TON of unused space they had to use sand offs for USB interface. Could just make it lower instead. Would cost less too. Otherwise its ok.

If you take out the foam filter in the front panel, your temperatures will drop about 10c. Awesome case but I don't know why they put in such a restrictive filter in the front.

If you’re considering this PC case specifically to use in an IKEA Kallax shelf, be aware that it’s a very tight fit. The Kallax openings are about 20mm or 1/2” wider than the case, but the height leaves literally no room to spare. It may be possible to remove the case feet, but that would block the vent openings on the bottom of the case. If the feet could be shortened maybe 10mm or 1/4” that would be perfect. Also, be aware that in order to access the power/reset buttons or usb ports, the case will need to protrude out the front of the Kaplan shelf a bit.

This case is very easy to build in. This is my first ever build wanted something simple, I’m sure cable management could be way better but good enough for me.