Bosch Puukkosahanterä S 1155 CHC; 3 kpl.
Plussat ja miinukset
asiantuntijoidemme laatimana
Tämä on pistosahan terä paksujen ja kovien metallien, kuten teräsprofiilien ja valurautaputkien, sahaukseen. Terä on jämäkkä suoriin leikkauksiin ja soveltuu intensiiviseen käyttöön. Se käy yleisiin pistosahoihin ja toimitetaan settinä useisiin leikkuutöihin.
Bosch Puukkosahanterä S 1155 CHC; 3 kpl. -arvostelut
Perustuu 9 arvosteluun
I managed to do 2 cuts on a 110 mm case iron pipe which was not too bad. It could be performing better, but, I think 2 cuts are not too bad.
I managed to do 2 cuts on a 110 mm case iron pipe which was not too bad. It could be performing better, but, I think 2 cuts are not too bad.
Milad
27. heinäkuuta 2024
We were cutting 3mm stainless steel sheet 30mm channel stiffeners at 150mm interval. In total we did 1500mm of cuts on 2 panels and used 5 blades. I am happy that they work and given that there are few alternatives, I would by them again. Remember this is a no spark method.
We were cutting 3mm stainless steel sheet 30mm channel stiffeners at 150mm interval. In total we did 1500mm of cuts on 2 panels and used 5 blades. I am happy that they work and given that there are few alternatives, I would by them again. Remember this is a no spark method.
win r
9. heinäkuuta 2024
I needed a better blade for removing garden grass rhizomes roots. Standard blades wore out very quickly. This blade worked great - slicing a deep cut in the root then use a wrecking bar to rip it out.
I needed a better blade for removing garden grass rhizomes roots. Standard blades wore out very quickly. This blade worked great - slicing a deep cut in the root then use a wrecking bar to rip it out.
r44flyer
30. toukokuuta 2024
I wasnt sure if this would be up to the job, but it surprised me, cutting through 7mm metal. It took a while but if you are slow and steady it will get through. Am sure there is enough life left in this for 2-3 more similar jobs. Just great.
I wasnt sure if this would be up to the job, but it surprised me, cutting through 7mm metal. It took a while but if you are slow and steady it will get through. Am sure there is enough life left in this for 2-3 more similar jobs. Just great.
Wigbuyer
23. syyskuuta 2023
Worked like a charm, yes it takes some time to cut and you have to let your saw cool down... The normal metal cutting blades just took the paint off this solid soil pipe. I guess it was cast iron but seems more like steel.
Worked like a charm, yes it takes some time to cut and you have to let your saw cool down... The normal metal cutting blades just took the paint off this solid soil pipe. I guess it was cast iron but seems more like steel.
Chris
9. elokuuta 2023
