Inter-Tech K-199, Jäähdytin, 8 cm, 1000 RPM, 5000 RPM (88885121)
Inter-Tech K-199, Jäähdytin, 8 cm, 1000 RPM, 5000 RPM (88885121) -arvostelut
Perustuu 14 arvosteluun
I'm using this in a mini-ITX build in an original PlayStation where every millimeter counts and it is perfect for the job. It is so short that the audio header on the motherboard is taller. My CPU is a 4130T and this keeps it around 32-35c idle and stable at 61-63c under load in prime95 stress test. A 35w CPU isn't the biggest challenge, but the size of the enclosure certainly is.
I'm using this in a mini-ITX build in an original PlayStation where every millimeter counts and it is perfect for the job. It is so short that the audio header on the motherboard is taller. My CPU is a 4130T and this keeps it around 32-35c idle and stable at 61-63c under load in prime95 stress test. A 35w CPU isn't the biggest challenge, but the size of the enclosure certainly is.
Stephen R.
10. huhtikuuta 2014
Keep in mind this is for a server room setup, as it is noisy.
Keep in mind this is for a server room setup, as it is noisy.
Stephen B.
9. tammikuuta 2014
This heatsink almost lasted two years. I don't think that is a bad deal for only $30. It kept my cpu temp at a tolerable level but often ran to loud when I was playing games. When my computer complained that there was a cpu fan error I opened it up and the fins were just caked in an inch layer of dust on every side. Because it is not very tall it does not have much surface area and dust builds up quickly. After cleaning it I still get the cpu fan error.
This heatsink almost lasted two years. I don't think that is a bad deal for only $30. It kept my cpu temp at a tolerable level but often ran to loud when I was playing games. When my computer complained that there was a cpu fan error I opened it up and the fins were just caked in an inch layer of dust on every side. Because it is not very tall it does not have much surface area and dust builds up quickly. After cleaning it I still get the cpu fan error.
Anonymous
2. kesäkuuta 2012
I have been using Dynatron CPU coolers for about 3 years, they still working without issues. Someone says is loud, is true but this is a server grade cooler, datacenters are even more louder so you won't hear this cooler
I have been using Dynatron CPU coolers for about 3 years, they still working without issues. Someone says is loud, is true but this is a server grade cooler, datacenters are even more louder so you won't hear this cooler
Guillermo C.
22. maaliskuuta 2012
I bought this with some amount of haste. However there was no documentation anywhere on how this was mounted. The brackets that was supposed to mount to the board (in my case Micro ATX) ran over the top of solder points and other components. Had to cancel the entire project due to this CPU fan.
I bought this with some amount of haste. However there was no documentation anywhere on how this was mounted. The brackets that was supposed to mount to the board (in my case Micro ATX) ran over the top of solder points and other components. Had to cancel the entire project due to this CPU fan.
Jesse R.
21. marraskuuta 2011
